Multi Purpose Drying Oven Main Features
1. The DGT2006BC Multi Purpose Drying Oven is suitable for high-temperature drying and heat treatment processes of epoxy resin and other composite materials.
2. The equipment is equipped with an automatic pressure relief door that automatically opens when the internal pressure is too high, ensuring safe and reliable operation.
3. An external exhaust pipe is located at the top to facilitate the discharge of volatile gases and maintain a clean working environment.
4. It adopts a Fuji digital display programmable control instrument, supporting multi-segment temperature control for precise temperature control and process repeatability.
5. The interior of the oven features a stripless and shelf-less design, facilitating the placement and handling of large or irregularly shaped workpieces. Shelves can be configured if needed.
6. It has a wide temperature range, adjustable from RT+10℃ to 200℃, meeting the heat treatment requirements of various materials.
7. The oven body uses a high-quality stainless steel inner liner and ultra-fine glass fiber insulation, which is energy-efficient, highly effective, and resistant to high-temperature corrosion.
Multi Purpose Drying Oven Specifications (DGT Series)
|
Optional program controller or touch screen controller, model corresponding |
DGT2006BC |
|
|
Performance |
Temp. Range |
R.T+10℃～200℃ |
|
Temp.Fluctuations |
±0.5℃ |
|
|
Temp. Uniformity |
±2.5%℃ |
|
|
Specification |
Working Room Dimensions(mm) |
800x800x1000 |
|
Outer Dimensions Around(mm) |
1050x1400x1380 |
|
|
Content Volume |
640L |
|
|
Power(KW) |
6KW |
|
|
Power Supply |
380V 50HZ |
|
|
Shelf |
2 stainless steel shelves |
|
|
Disposition |
Structural |
Integral, the control panel is placed on the front of the equipment. |
|
Door |
Single door |
|
|
Exterior Material |
Cold-rolled steel plate with electrostatic double-sided spraying. |
|
|
Internal Material |
High quality stainless steel plate |
|
|
Insulation |
Fiberglass |
|
|
Door Seal |
High temperature resistant silicone rubber strip sealing |
|
|
Temp. Sensor |
Pt100 Platinum resistance |
|
|
Heater |
Nichrome electric heating tube |
|
|
Safety Door |
There is a pressure relief door at the rear of the equipment that opens automatically if the working room is overpressurized(After opening, it needs to be turned off manually). |
|
|
Safety Devices |
Heater short circuit, working room over-temperature protection, blower motor overload, etc., improve the safety of use |
|
|
Remarks |
The inner and outer dimensions are marked as：D×W×H; Recommended conditions for device use：Ambient temperature 5℃～＋30℃,Ambient humidity：≤85%RH; The above data are measured under no-load conditions. |
|
Our Services
1. Free testing solutions and technical parameters provided.
2. 12-month free warranty and 24-hour online service.
3. Product images and videos available before shipment.
4. All equipment undergoes debugging and calibration before leaving the factory, and factory inspection reports are available.
5. Multiple shipping methods available, door-to-door delivery supported.
6. Lifetime technical support provided.
7. Controller display interface available in multiple languages.
Multi Purpose Drying Oven Advantages
1. We are a certified high-tech enterprise with 25 years of experience in manufacturing testing equipment. Our factory is certified to ISO 9001:2015, ISO 14001:2015, and ISO 45001:2018.
2. We own our factory, covering an area of 22,691 square meters. We have fully in-house production capabilities.
3. We are a one-stop testing solution provider, offering door-to-door service.
4. The entire equipment manufacturing process is completed in-house, with dedicated quality control personnel at each stage, resulting in a low equipment failure rate.
Our partner & Honor
FAQ
Q: What is the packaging method for the equipment?
A: Sturdy wooden crates or reinforced cardboard boxes to ensure the safety of the equipment during long-distance transportation. Additionally, special markings can be affixed upon customer request. After shipment, we can provide a tracking number for your convenience in real-time tracking.
Q: Do you support non-standard customization?
A: Yes. We specialize in non-standard customized equipment and have extensive experience. We have customized a 2520m³ large-scale low-temperature environment test chamber for a Fortune 500 company. Please provide your specific requirements (temperature, dimensions, functions, etc.), and we will provide you with a professional customized drying oven solution.
Q: What's the difference between a drying oven with a pressure relief door and a regular drying oven?
A: In terms of structural design, a drying oven with a pressure relief door has an additional door. During the drying process of materials or parts, if volatile gases are generated, increasing the pressure inside the drying oven, the pressure relief door will automatically open, providing a safety protection function. Furthermore, drying ovens with pressure relief doors typically use electric heating elements, further enhancing safety.
Q: How do I choose whether a drying oven needs a pressure relief door?
A: If your drying materials produce volatile gases, we recommend choosing a drying oven with a pressure relief door. This drying oven is particularly suitable for users in the epoxy resin and chemical industries.
Q: What is the delivery time for the drying oven?
A: Delivery time is 30-45 days. If you need it urgently, we can arrange expedited production.
Hot Tags: multi purpose drying oven, China multi purpose drying oven manufacturers, suppliers, factory, Large Lab Oven, Hot Oven in Laboratory, Industrial Hot Air Oven, used drying oven, Large Drying Oven, Hot Oven Laboratory
