precision composites curing oven Main Features
The equipment has an internal volume of 640L and a working chamber size of 800×800×1000mm, suitable for drying, baking, and heat treatment of small to medium batches of materials.
An automatic pressure relief door is located at the rear of the chamber, which automatically opens when the internal pressure rises abnormally, effectively ensuring equipment and operational safety.
The heating system uses a nickel-chromium alloy electric heater, located in the left-side air duct, providing rapid heating; it takes only less than 40 minutes to heat from room temperature to 100℃.
It adopts a Fuji digital display programmable controller, supporting multi-segment programmable temperature control to meet the automated operation requirements of complex process curves.
It has multiple electrical safety protections, including power phase loss, leakage, and overcurrent protection, ensuring safe and reliable equipment operation.
The temperature can be adjusted arbitrarily between RT+10℃ and 200℃.
We provide a 12-month free warranty and lifetime technical service for this equipment, ensuring users have no worries.
Precision Composites Curing Oven Specifications (DGT Series)
|
Optional program controller or touch screen controller, model corresponding |
DGT2006BC |
|
|
Performance |
Temp. Range |
R.T+10℃～200℃ |
|
Temp.Fluctuations |
±0.5℃ |
|
|
Temp. Uniformity |
±2.5%℃ |
|
|
Specification |
Working Room Dimensions(mm) |
800x800x1000 |
|
Outer Dimensions Around(mm) |
1050x1400x1380 |
|
|
Content Volume |
640L |
|
|
Power(KW) |
6KW |
|
|
Power Supply |
380V 50HZ |
|
|
Shelf |
2 stainless steel shelves |
|
|
Disposition |
Structural |
Integral, the control panel is placed on the front of the equipment. |
|
Exterior Material |
Cold-rolled steel plate with electrostatic double-sided spraying. |
|
|
Internal Material |
High quality stainless steel plate |
|
|
Insulation |
Fiberglass |
|
|
Door Seal |
High temperature resistant silicone rubber strip sealing |
|
|
Temp. Sensor |
Pt100 Platinum resistance |
|
|
Heater |
Nichrome electric heating tube |
|
|
Safety Door |
There is a pressure relief door at the rear of the equipment that opens automatically if the working room is overpressurized(After opening, it needs to be turned off manually). |
|
|
Remarks |
The inner and outer dimensions are marked as：D×W×H; Recommended conditions for device use：Ambient temperature 5℃～＋30℃,Ambient humidity：≤85%RH; The above data are measured under no-load conditions. |
|
Our Services
1. Free testing solutions and technical parameters provided.
2. 12-month free warranty and 24-hour online service.
3. Product images and videos available before shipment.
4. All equipment undergoes debugging and calibration before leaving the factory, and factory inspection reports are available.
5. Multiple shipping methods available, door-to-door delivery supported.
6. Lifetime technical support provided.
7. Controller display interface available in multiple languages.
Our partner & Honor
FAQ
Q: Do you support non-standard customization?
A: Yes. We specialize in non-standard customized equipment and have extensive experience. We have customized a 2520m³ large-scale low-temperature environment test chamber for a Fortune 500 company. Please provide your specific requirements (temperature, dimensions, functions, etc.), and we will provide you with a professional customized drying oven solution.
Q: What's the difference between a drying oven with a pressure relief door and a regular drying oven?
A: In terms of structural design, a drying oven with a pressure relief door has an additional door. During the drying process of materials or parts, if volatile gases are generated, increasing the pressure inside the drying oven, the pressure relief door will automatically open, providing a safety protection function. Furthermore, drying ovens with pressure relief doors typically use electric heating elements, further enhancing safety.
Q: How do I choose whether a drying oven needs a pressure relief door?
A: If your drying materials produce volatile gases, we recommend choosing a drying oven with a pressure relief door. This drying oven is particularly suitable for users in the epoxy resin and chemical industries.
Q: What is the delivery time for the drying oven?
A: Delivery time is 30-45 days. If you need it urgently, we can arrange expedited production.
Hot Tags: precision composites curing oven, China precision composites curing oven manufacturers, suppliers, factory, Battery Test Safety Chamber, precision oven, oven for drying, Precision Composites Curing Oven, Dry Oven Lab Equipment, industrial drying oven
